Re: [LUG] USB modems

[Kai Hendry <hendry@xxxxxxxxxxxxxx>]

On Sun, Dec 22, 2002 at 09:22:11PM +0000, Tom Glare wrote:
> > I'm not sure how to read the /proc/bus/usb listings to work out which /dev/ 

none            /proc/bus/usb   usbdevfs        noauto
0       0

You need a line like that in your fstab. Or you can mount it manually with
mount -t usbdevfs I guess. It is in the usb guide online somewhere. Then
prodding around the dir, reveals a lot:

hendry@xxxxxxx:/proc/bus/usb$ cat devices
T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc= 93/900 us (10%), #Int=  1, #Iso=  0
D:  Ver= 1.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 0.00
S:  Product=USB UHCI Root Hub
S:  SerialNumber=ff80
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=255ms
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=1.5 MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=045e ProdID=0040 Rev= 1.21
S:  Manufacturer=Microsoft
S:  Product=Microsoft Wheel Mouse Optical®
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=02 Driver=hid
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=10ms
hendry@xxxxxxx:/proc/bus/usb$ cat drivers
        usbdevfs
        hub
96-111: hiddev
        hid

That is what I get with an USB mouse plugged in.

> Get Yer Modem Working (Modem Working) - who sang that one ?
> Tom.

Don't quote the whole of Neil's entire message. In fact with that reply,
you needn't reply at all.

-Kai

--
The Mailing List for the Devon & Cornwall LUG
Mail majordomo@xxxxxxxxxxxx with "unsubscribe list" in the
message body to unsubscribe.