[ Date Index ] [ Thread Index ] [ <= Previous by date / thread ] [ Next by date / thread => ]
On 06/11/2018 15:52, mr meowski wrote:
I speculatively imagine that if you put the Netgear into modem mode then you will probably need to use PPPoE on the Draytek rather than DHCP. This would be better as the Draytek should then get the public IP address on the WAN interface rather than the double-NAT in my last post.On 06/11/2018 14:31, Richard Brown wrote:So, I now want to switch off all functionality in the Netgear and let the Draytek take over, using the Netgear simply as a modem.https://kb.netgear.com/25078/DGN2200v4-FAQs "Is there a way to set the DGN2200v4 as a modem only? Yes. It is now added on firmware version 1.0.0.46. It can be seen under Device Mode on Advanced setup." Seems like your first job is to make sure the firmware is up to date on both devices and then put the Netgear into modem mode surely. It'll make the subsequent steps easier as well. Cheers
-- The Mailing List for the Devon & Cornwall LUG https://mailman.dclug.org.uk/listinfo/list FAQ: http://www.dcglug.org.uk/listfaq