Re: [LUG] Asterisk - Blacklist wildcard by area code?

Hi

Thanks Gordon

It was in bound sales pest phone calls, and the number had been TPS also.

Many thanks will give it a try.

Regards

Sam Grabham.

> Date: Wed, 11 Jan 2012 15:36:56 +0000
> From: gordon+dcglug@xxxxxxxxxx
> To: list@xxxxxxxxxxxxx
> Subject: Re: [LUG] Asterisk - Blacklist wildcard by area code?
>
> On Tue, 10 Jan 2012, Sam Grabham wrote:
>
> >
> > Hi
> >
> > Does anyone know if its possible to blacklist area codes via a wild card
> > such as 0843 & 0844?
> >
> > ie "database put blacklist 90843 1" and "database put blacklist 90844 1"
> >
> > does the number need a wild-card identifier? such as * # % to suffix the
> > number.
> >
> > Will look into to this, but for speed i thought i would ask the list
> > in-case someone has already done this.
>
> Do you mean to stop people dialing out, or dialling in?
>
> I've never used the built-in blacklist stuff, but I'm not sure it supports
> wildcards.
>
>
> For inbound stuff, just direct it to an extension that won't answer
>
> exten => _0844.,1,Noop(Bah)
> exten => _0844.,n,Hangup()
>
> To stop people dialling out, you can do it the same way, or just use an if
> statemnt.
>
> I do it based on other criteria, but it's all just code at the end of the
> day:
>
> ; Access Level 1 check:
> ; No 09x or 070x numbers (premium rate)
>
> exten => s,n(checkLevel1),Noop(Macro-dialOut: Level 1 access check - All but 09 and 070 ...)
> exten => s,n,Set(DIGIT=${ARG1:1:1})
> exten => s,n,GotoIf($[${DIGIT}=9]?noAccess)
> exten => s,n,Set(DIGIT=${ARG1:1:2})
> exten => s,n,GotoIf($[${DIGIT}=70]?noAccess:dialOutOK)
>
> (this is inside a macro which is called when people dial 0 for an outside
> line - you are using 9 - how quaint ;-)
>
> Gordon
>
> --
> The Mailing List for the Devon & Cornwall LUG
> http://mailman.dclug.org.uk/listinfo/list
> FAQ: http://www.dcglug.org.uk/listfaq