[ Date Index ] [ Thread Index ] [ <= Previous by date / thread ] [ Next by date / thread => ]
Grant Sewell wrote: > Hi all, > > After looking around at various data plan, etc, I decided I would go for > Three's "Broadband Lite" package for my phone. > > I am trying to get both USB and Bluetooth connections working. > > Currently I have /dev/rfcomm0 up and running, and my wvdial.conf is as such: > > [Dialer Defaults] > Init1=ATZ > Init2=ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > Init3=AT+CGDCONT=1,"IP","mobile.three.co.uk","",0,0 > modem=/dev/rfcomm0 > Baud=460800 > Modem Type=Analog Modem > ISDN=0 > Phone = *99# > Username = user > Password = passwd > New PPPD = yes > Stupid Mode = 1 > > Now, when I try "wvdial" from the commandline (as root), I get: > > --> WvDial: Internet dialer version 1.60 > --> Cannot get information for serial port. > --> Initializing modem. > --> Sending: ATZ > ATZ > OK > --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > OK > --> Sending: AT+CGDCONT=1,"IP","mobile.three.co.uk","",0,0 > AT+CGDCONT=1,"IP","mobile.three.co.uk","",0,0 > OK > --> Modem initialized. > --> Sending: ATDT*99# > --> Waiting for carrier. > ATDT*99# > CONNECT > ~[7f]}#@!}!} } }2}#}$@#}!}$}%\}"}&} }*} } g}%~ > --> Carrier detected. Starting PPP immediately. > --> Starting pppd at Thu Jan 8 14:56:12 2009 > --> Pid of pppd: 8727 > --> Using interface ppp0 > --> pppd: ا[06][08][18]�[06][08][08]�[06][08] > --> pppd: ا[06][08][18]�[06][08][08]�[06][08] > --> pppd: ا[06][08][18]�[06][08][08]�[06][08] > --> pppd: ا[06][08][18]�[06][08][08]�[06][08] > --> pppd: ا[06][08][18]�[06][08][08]�[06][08] > --> pppd: ا[06][08][18]�[06][08][08]�[06][08] > --> Disconnecting at Thu Jan 8 14:56:16 2009 > --> The PPP daemon has died: A modem hung up the phone (exit code = 16) > --> man pppd explains pppd error codes in more detail. > --> Try again and look into /var/log/messages and the wvdial and pppd > man pages for more information. > --> Auto Reconnect will be attempted in 5 seconds > --> Cannot open /dev/rfcomm0: Input/output error > --> Cannot get information for serial port. > > I get the same thing when I try with /dev/ttyACM0 (ie my phone's USB > connection). > > Any thoughts? > Grant. :) Nevermind... I have it sorted now. Here's my revised wvdial.conf: [Dialer Defaults] Init1=ATZ Init2=ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 Init3=AT+CGDCONT=1,"IP","three.co.uk","",0,0 modem=/dev/rfcomm0 Baud=460800 Modem Type=Analog Modem ISDN=0 Phone = *99# Username = user Password = passwd New PPPD = yes It was the APN bit I was getting wrong - it's now set to "three.co.uk" and it works. I also remove stupid mode because it's not needed, apparently. Grant. -- The Mailing List for the Devon & Cornwall LUG http://mailman.dclug.org.uk/listinfo/list FAQ: http://www.dcglug.org.uk/linux_adm/list-faq.html