[ Date Index ] [ Thread Index ] [ <= Previous by date / thread ] [ Next by date / thread => ]
Dear Robin and Neil and all Further to my report on scanner details, here are contents of /etc/sane.d/snapscan.conf >>From the top #------------------------------ General ----------------------------------- # Change to the fully qualified filename of your firmware file, if # firmware upload is needed by the scanner firmware /usr/share/sane/snapscan/your-firmwarefile.bin # If not automatically found you may manually specify a device name. # For USB scanners also specify bus=usb, e.g. # /dev/usb/scanner0 bus=usb and lower down #--------------------------- USB scanners ----------------------------------- # These USB devices will be probed automatically # (This will currently work only on Linux) and the item referring to mine # Agfa 1212U usb 0x06bd 0x0001 usb 0x06bd 0x2061 Is that sufficientinformation for your detailed advice on howI should edit the .conf file? > -- james kilty http://www.kilty.demon.co.uk -- The Mailing List for the Devon & Cornwall LUG http://mailman.dclug.org.uk/listinfo/list FAQ: http://www.dcglug.org.uk/linux_adm/list-faq.html