[ Date Index ] [ Thread Index ] [ <= Previous by date / thread ] [ Next by date / thread => ]
exetmp03 wrote: >> -----Original Message----- >> From: list-bounces@xxxxxxxxxxxxx >> [mailto:list-bounces@xxxxxxxxxxxxx] On Behalf Of Rob Beard >> Sent: 31 October 2006 14:40 >> To: list@xxxxxxxxxxxxx >> Subject: Re: [LUG] Issues with DSL router - getting stuck >> >> >> Quoting Mike Martin <redtux1@xxxxxxxxxxxxxx>: >> >> >>> On 31/10/06, Robin Cornelius <robin.cornelius@xxxxxxxxx> wrote: >>> >>>> On 10/31/06, exetmp03 <exetmp03@xxxxxxxxxxxxxxxxxxxxxxx> wrote: >>>> >>>>> Hi this is getting quite embarrassing but I amhaving great probs >>>>> connecting to an ADSL router >>>>> >>>>> Anyone any ideas what is going wrong >>>>> >>>> Are you firewalled? >>>> >>>> Is the router set to not respond to pings? >>>> >>>> Have you looked at the output usual network commands, >>>> >> ifconfig, route? >> >>>> Have you tried assigning a manual static ip address eg :- >>>> >>>> ifconfig eth0 192.168.0.2 >>>> >>>> -- >>>> Robin Cornelius >>>> http://www.byteme.org.uk >>>> >>>> -- >>>> The Mailing List for the Devon & Cornwall LUG >>>> http://mailman.dclug.org.uk/listinfo/list >>>> FAQ: http://www.dcglug.org.uk/linux_adm/list-faq.html >>>> >>>> >>> yep tried all these (tried 10.0.0.6 and 10.0.15) >>> >>> >> Can you reset the router to the defaults and try that? >> >> > > tried > > >> What output do you get from ifconfig when it is connected? >> > > output of ifconfig > [root@localhost ~]# /sbin/ifconfig > eth0 Link encap:Ethernet HWaddr FF:FF:FF:FF:FF:FF > inet addr:10.0.0.11 Bcast:255.255.255.255 Mask:255.0.0.0 > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:67 errors:0 dropped:0 overruns:0 frame:0 > TX packets:84 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:4550 (4.4 KiB) TX bytes:3828 (3.7 KiB) > Interrupt:10 Base address:0xd400 > > (plus lo of course) > I did find some document on setting one of these routers up. It seems that there is a Windows configuration program for the routers although this might not be much good. This documentation did suggest that the default IP address for the router is 10.0.0.2 Have you tried the command ip route add default via 10.0.0.2 (found this command here: http://linux-ip.net/html/tools-ip-route.html) If you enter 10.0.0.2 into a web browser do you get the standard router interface? Rob -- The Mailing List for the Devon & Cornwall LUG http://mailman.dclug.org.uk/listinfo/list FAQ: http://www.dcglug.org.uk/linux_adm/list-faq.html